ABS

ABS is a high-performance filament trusted by engineers, designers, and makers alike. It delivers excellent impact resistance, chemical stability, and long-term durability, making it ideal for housings, fixtures, mechanical components, and functional prototypes. With a heat deflection temperature up to 96 °C and reliable dimensional stability, your prints can handle demanding environments without compromise.

BEDROCK 3D ABS works with many open-material FFF printers and comes with print profiles for Ultimaker, Prusa and Bambu Lab, making setup effortless and results consistent. For best results, use a heated bed (90–110 °C) and print between 240–260 °C.

Post-processing is simple too, including acetone smoothing for a clean, polished finish.

Material Highlights

• Long life span
• Very tough
• High wear and tear
• Can be used for working parts
• Chemical resistance
  

• Functional prototypes
• Chemical environment
• Reasonable heat resistance
  

• Nozzle Temperature: 240-260 °C
• Build Chamber Temperature: -
• Bed Temperature: 90 - 110 °C
• Bed Material: Tape, Spray, Glue
• Nozzle Diameter: ≥ 0.4 mm
• Print Speed: 40-80 mm / s

We’ve got you covered with ready-to-go print profiles, just download and start creating.

• Tensile Strength (MPa): 21.3 (ZX), 36.3 (XY)
• Flexural Modulus (MPa): 1587 (ZX), 1767 (XZ), 1833 (XY)
• Elongation at Break: 1.8 % (ZX), 7.4 % (XY)
• Impact Strength Izod notched (kJ/m2): 3.5 (ZX), 18.9 (XZ), 18.8 (XY)
• Impact Strength Izod unnotched (kJ/m2): 7.2 (ZX), 35.7 (XZ), 40.0 (XY)
• HDT @ 0.45 MPa: 96 °C